Here in this guide, we will help you to flash the magisk to root Galaxy J6 Plus (SM-J610x: Here X stands for all version). Read our step by step guide properly!

Who doesn’t want to get the most of his Android device..?! Getting the superuser access through root and to be able to control various aspects like clock, access to cache etc. are few of the various possibilities that we can explore. When we mention root access, this means we need to perform a certain modification that will root our phone and we will have access to the root directory of our device. In this post, we will show you how to root Galaxy J6 Plus (SM-J610).

Just in case, if you don’t already know, the Samsung Galaxy J6 Plus comes with a 6.0 inch FULL HD Display. Talking about the internals, the Samsung Galaxy J6 Plus is powered by a Snapdragon 425 chip along with Adreno 308 GPU and 4 GB of RAM. On the camera front, the J6 Plus has a dual camera setup at the rear. This consists of a 13 MP and a 5 MP cameras. There is a single 8 MP camera at the front for selfies. There is a 3300 mAh capacity battery powering this device.

Also Read

Best Custom ROM for Samsung Galaxy J6 Plus

We will use the Magisk by patching the stock boot image and flash that to your boot partition. All you need to do is download the patched image file from Magisk Manager and flash it.

You need to have an unlocked bootloader on your phone before you can root Galaxy J6 Plus. We have detailed the method on that below.

Mostly uninitiated people compare rooting with hacking which is not correct. The purpose in both contexts is quite different. Hacking is more like breaking into someone’s else system illegally, whereas rooting is mostly done by the owner of an Android device to gain superuser advantages of the device.

Steps To Root Galaxy J6 Plus Using Magisk

First of all, we need to unlock the device bootloader on Samsung Galaxy J6 Plus. Then you can continue with the next steps. After this, we need to download and flash the patched ramdisk file which we mentioned above.

Remember,

  • After Rooting, it may void the warranty of your phone.
  • Rooting will block the OTA updates

Download Stock ROM and Extract the Boot Image

Here is the link for the same.

Before moving on to the flashing steps, you need to follow a few,

Download the patched boot image here.

Pre-Requisites

  • Make sure to have enough battery charge on your phone to avoid interruption during the patch installation.
  • Before performing any modification take backup of your device data.
  • This image file is strictly for Samsung Galaxy J6 Plus only. Do not use it on any other Samsung or other Android devices.
  • Download Latest ODIN File
  • A PC/Laptop and a micro USB cable.
  • Drop the Patched boot image file inside your ADB/Fastboot folder
  • Install Samsung USB Drivers.

How To Install the Patched Boot Image on Samsung Galaxy J6 Plus (SM-J610)

Assuming that you have used our above instruction and unlocked the bootloader, we will continue on flashing the patched boot image.

Disclaimer: We are at GetDroidTips will not be responsible for any bricking/damage to your phone while/after installing this ROM.

Advertisement

  • First, let’s begin by booting our phone into download mode.
  • Connect your phone to PC using the USB cable
  • Once you are connected, now open the downloaded ODIN exe
  • When you connect the USB cable you will see a blue sign in Odin
  • Now Load the patched boot tar file in the AP section.
  • Make sure re-partition is NOT ticked – Go to Option and see (Let the Auto Reboot and F-Reset Time be ticked)
  • Now tap on the start button to root your device.
  • Once it is done, your device will reboot.
  • First boot will take some time.

So, that’s it. Now that you have rooted your Samsung Galaxy J6 Plus (SM-J610), you can try this out. If you have any queries regarding this, do let us know.